Feal Suspension has quite a few options, from basic street car coilovers, all the way to a full blown race car setup. They also offer Swift Spring upgrades, as well as custom valving and spring rates depending on your choice.

More information can be found below

• The standard 441 with our Feal brand springs are completely non-customizable

• The standard 441+ can be +/-2k front advertised before requiring custom shock valving (additional cost)

• 441+ Road Race Spec, 441.5, 442, and 443 all include custom valving and spring rates as standard.

Default spring rates:

441/441+: 8k/5k

The front lower mounts are designed to be welded directly onto the factory spindle.

Each shock is designed with expertise from our success in many top-level international motorsports and through years of experience tuning various shock brands. We at Feal Suspension strongly believe that our coilovers have an edge on shock design that gives you confidence and a competitive advantage where needed most.

441 - Damping adjustability that adjusts Rebound and Compression in one knob. Very easy to tune vehicle firmness, dive, and roll.

442 - Separate damping adjustability for Rebound and Compression. Rebound adjustability does not change compression force so that you can fine tune the roll and rate of weight transfer. The huge range of compression adjustability is independent of rebound force. The compression adjustability will allow you to adjust for more or less traction and more or less suspension movement on the compression stroke.

443 - All of the above plus separate damping adjustability for High Speed Compression, Low Speed Compression, and Rebound. Low speed compression damping adjustability allows you to fine tune chassis movement on the compression stroke over round bumps and/or throttle and braking inputs. High speed compression adjustability allows you to fine tune bottoming resistance and wheel movement on the compression stroke over rumble strips and square edge bumps.